Lifelong masterpieces
MossyHill Sawmill
- Custom Sawing
- At Your Site
- Reasonable Rates
I can cut logs up to 18' in length and 39" in diameter. The band saw blade kerf will produce more lumber per log than the traditional circular sawmills. My daily production varies but, average about 1,800 board feet per day. I can mill any species of wood, dried or green, into any dimension desired.
Charges (Note: A board foot of dimensional lumber).
- Setup fee - $75
- Softwoods - .37 cents/bf
- Hardwoods - .47 cents/bf
- Materials less than 1 inch thick - .40 cents (Softwood) .50 cents (Hardwood)
- Quarter sawn on hardwoods is - .51
- Specialty cutting $75 an hour
Quarter sawn lumber is used to remove the heart wood or limit the hardwood, so you end up with straight boards. It's a tedious task, but can be worth it. I only travel 35 miles from my shop.
VERY IMPORTANT!!!!!!! (log preparation must be completed before sawmill arrives.)
- Log must be 12" across or greater at the small end. Max is 39"
- Cutting the logs to the desired length
- Moving the logs to one central location
- Positioning the logs parallel to each other
- Centering the logs lengthwise
- Placing the logs on skids so easy rolling from skids to hydraulic loaders
- Removing dirt and stones from the logs if dragged through mud or sand
- Site access, mill is 32FT long plus the hauler
- Damaged Blade: $10
- Broken Blade: $25